Batteries are shipped with a partial charge; however, for best performance with first time use, it is recommended that you fully charge the batteries before using them.
Complete the following steps:
- Remove your device and Liquidpod from packaging.
- Unfold the attached USB cord from the pack and plug it into a USB-compatible charging port.
- Connect the rechargeable device to the USB cord with the charging contacts properly aligned.
- Once your device begins charging, the red light on the end will glow and remain illuminated.
- When the indicator light turns off, your blu is fully charged.
If the red light blinks rapidly, remove the battery for 10 seconds then reinsert into the pack. If the red light continues to blink rapidly, then the battery is defective or has been depleted of its charge, and the battery should be discarded and replaced with a new one. In the event you need to exchange your battery, complete the Replacement Merchandise Authorization (RMA) form online.