There are multiple reasons why this may be happening.
This is the most common reason why your electronic cigarette is producing low vapor volume. Replace it with a fully charged battery.
Check the intake hole
If you’ve tried using a fully charged battery and vapor production is still low, ensure you’ve removed the pull tab (the small sticker) from the blu Tank™. This problem also occurs if your fingers are blocking the intake hole, so be mindful of how you hold your e-cig!
Over time, residue can build up in the threads of your e-cig battery, which can impact the performance and vapor production of your e-cig. If you’ve tried the previous tips but still don’t have good vapor production, try cleaning the battery threads next. To do this, you will need cotton swabs and the battery itself.
- Take one end of the cotton swab and rub it over the battery threads in a circular motion. If the threads are dirty, you will see the residue on the cotton swab.
- Blow on the battery threads to make sure any extra residue is removed.
- Screw the clean battery into a blu Tank™ and take a drag on your e-cig.
Atomizer needs a boost
Sometimes you may need to give the atomizer a little boost to increase vapor production. With your fully assembled e-cig, blow into the blu Tank™ quickly and repeatedly 4-8 times. This will activate the atomizer, which heats the liquid and turns it into vapor. Once you see vapor, wait for 15-30 seconds, and then start using your electronic cigarette normally.
Faulty blu Tank™
Finally, if you’ve tried the tips above and you still can’t get good vapor production, you may have a faulty blu Tank™. Replace it with a new one.